bdt64-a-b-c 26/09/2012 comset semiconductors 1 | 5 semiconductors silicon darlington power transistors pnp epitaxial-base transistors in a monolithic dalrington circuit and housed in a to-220 enveloppe. they are intended for output stages in audio equipment, general amplifiers, and analogue switching application. pnp complements are bdt65-a-b-c compliance to rohs. absolute maximum ratings symbol ratings value unit v cbo collector-base voltage bdt65 -60 v bdt65a -80 bdt65b -100 bdt65c -120 v ceo collector-emitter voltage bdt65 -60 v bdt65a -80 bdt65b -100 bdt65c -120 v ebo emitter-base voltage bdt65 -5 v bdt65a bdt65b bdt65c i c collector current bdt65 -12 a bdt65a bdt65b bdt65c i cm collector peak current bdt65 -20 a bdt65a bdt65b bdt65c
bdt64-a-b-c 26/09/2012 comset semiconductors 2 | 5 semiconductors absolute maximum ratings symbol ratings value unit i b base current bdt64 -500 ma BDT64A bdt64b bdt64c p t power dissipation @ t mb < 25 bdt64 125 watts BDT64A bdt64b bdt64c t j junction temperature bdt64 150 c BDT64A bdt64b bdt64c t s storage temperature range bdt64 -65 to +150 BDT64A bdt64b bdt64c limiting values in accordance with the absolute maximum system (iec 134) thermal characteristics symbol ratings value unit r thj-c thermal resistance, junction to case 1 c/w
bdt64-a-b-c 26/09/2012 comset semiconductors 3 | 5 semiconductors electrical characteristics tc=25c unless otherwise noted symbol ratings test condition(s) min typ max unit i cbo collector cutoff current i e = 0,v cb = -v cbo max bdt64 - - -0.4 ma BDT64A bdt64b bdt64c i e = 0,v cb = -1/2 v cbo max t j = 150 c bdt64 - - -2 ma BDT64A bdt64b bdt64c i ceo collector cutoff current i e = 0, v ce = -1/2 v ceo max bdt64 - - 0.2 ma BDT64A bdt64b bdt64c i ebo emitter cutoff current v eb = -5 v, i c = 0 bdt64 - - -5 ma BDT64A bdt64b bdt64c v ceo collector-emitter breakdown voltage i c = -30 ma, i b = 0 bdt64 -60 - - v BDT64A -80 - - bdt64b -100 - - bdt64c -120 - - v ce(sat) collector-emitter saturation voltage (*) i c = -5 a, i b = -20 ma bdt64 - - -2 v BDT64A bdt64b bdt64c i c = -10 a, i b = -100 ma bdt64 - - -3 BDT64A bdt64b bdt64c
bdt64-a-b-c 26/09/2012 comset semiconductors 4 | 5 semiconductors electrical characteristics tc=25c unless otherwise noted symbol ratings min typ max unit v be(on) base-emitter voltage (*) i c = -5 a, v ce = -4 v bdt64 - - -2.5 v BDT64A bdt64b bdt64c v ecf c-e diode forward voltage i f = -5 a bdt64 - -2 v BDT64A bdt64b bdt64c i f = -12 a bdt64 - -2 - BDT64A bdt64b bdt64c h fe dc current gain (*) v ce = -4 v, i c = -1 a bdt64 - 1500 - - BDT64A bdt64b bdt64c v ce = -4 v, i c = -5 a bdt64 1000 - - BDT64A bdt64b bdt64c v ce = -4 v, i c = -12 a bdt64 - 750 - BDT64A bdt64b bdt64c c ob output capacitance i e = 0, v cb = -10 v f test = 1mhz bdt64 - 200 - pf BDT64A bdt64b bdt64c switching times symbol ratings test condition(s) min typ max unit t on turn-on time i c = -5 a , v cc = -30 v i b1 = -i b2 = -20 ma - 0.5 2 s t of f turn-off time - 2.5 5 (*) pulse width 300 s, duty cycle 2.0%
bdt64-a-b-c 26/09/2012 comset semiconductors 5 | 5 semiconductors mechanical data case to-220 dimensions (mm) min. max. a 9,90 10,30 b 15,65 15,90 c 13,20 13,40 d 6,45 6,65 e 4,30 4,50 f 2,70 3,15 g 2,60 3,00 h 15,75 17.15 l 1,15 1,40 m 3,50 3,70 n - 1,37 p 0,46 0,55 r 2,50 2,70 s 4,98 5,08 t 2.49 2.54 u 0,70 0,90 revised august 2012 ????????? ? information furnished is believed to be accurate and reliable. ho wever, comset semiconductors assumes no responsibility for the consequences of use of such information nor for any infringement of patents or ot her rights of third parties which may results from its use. da ta are subject to change without notice. co mset semiconductors makes no warranty, representation or guarantee re garding the suitability of its products for any particular purpose, nor does comset semicond uctors assume any liability aris ing out of the application or us e of any product and specifica lly disclaims any and all liability, including without limitation consequential or in cidental damages. comset semiconductors? products are not au thorized for use as critical components in life support devices or systems. ? ? www.comsetsemi.com info@comsetsemi.com pin 1 : base pin 2 : collector pin 3 : emitter package collector
|
